How to Replace the Power Supply Fan in a Dell Optiplex GX520

How to Replace the Power Supply Fan in a Dell Optiplex GX520
How to Replace the Power Supply Fan in a Dell Optiplex GX520

I did some more searching and found others who had this same issue on that particular model of Dell, which has a particular model of fan on the power supply: ADDA Model AD0712MS-D70.  It is a 70mm x 70mm x 14mm 12V fan.  I decided to order some replacement fans for the power supply and do that instead of ordering an entire new power supply.  The used power supply cost me $24.99 on ebay and the replacement fan ran me $4.99 plus the time it took to open up the supply and replace the fan.  I like fixing stuff so I ordered 3 fans and I’ll probably opt to just replace them in the future.  Hopefully the overheated power supplies don’t develop solder cracks or the heat fries a capacitor.

How to Replace the Power Supply Fan in a Dell Optiplex GX520

Equipment:

Parts Needed

Tools Needed:

Step 1: Remove the power supply from the computer.

You can follow my blog post here for steps on how to remove it.

Step 2:  Remove all the screws on the fan side of the power supply.

This includes the 4 that hold the fan and grill to the inside of the case, the other 5 you can see, and 1 under the “Guarantee void if removed” sticker.This is the continuation of another post, Computer Randomly Shuts Off Power Supply Issues on a Dell Optiplex GX520 (Small Form Factor), which has grown into it’s own article.  I had a Dell GX520 that kept powering off at random times.  I tested the memory, HD, and couldn’t find anything wrong with it and then noticed that the power supply’s fan was struggling to spin.  I ended up ordering a new power supply.  Now another GX520 start shutting off on us and the indicator light on the front panel was in fact flashing orange–indicating a power issue (see Dell’s website here to decode your flashing power button light).

Dell Optiplex GX520 with a flashing Amber Power Light Indicating a Power Supply Issue

 

Step 3: Remove the 1 screw on the bottom of the case.

Step 4: Clip the zip tie that connects the wire bundle to the case cover.

Step 5: Remove the power supply cover by sliding it straight up (up being the fan side).

Step 6: Cut the wires leading to the fan.

Leave yourself room to connect the remaining wires to the new fan.

Step 7: Connect the new fan.

Because of space constraints I suggest soldering the connections to the new fan and using shrink tubing to insulate the connections.

The yellow wire on the fan is not going to be used.  It is an RPM output from the fan which is not needed in our application.  Cut it off:

Strip the wires and tin them to make it easier to solder them together:

I had a dirty solder gun, therefore the black residue on the solder.

Slip on the shrink tube before soldering the connections.  Make sure it is far enough away from where you are soldering because the heat from the soldering will shrink it.

Slip the shrink tub on before soldering the wires.

Watch that there isn’t something fragile in the path of the hot air (especially your hand) because these heat guns are dangerous.

Shrinking the shrink tube with my heat gun

Step 8: Screw the fan and fan grill onto the case cover.

The screws that came with the fan I bought will not work because the holes are too big on the side I need to mount.  NOTE: the fan needs to blow IN, which means the label on the fan will be on the inside.  I was forced to go through my junk screw drawer and find a longer screw:

The ones I found that were too long so I had to cut them off:

There originally were 4 screws but I’m going to only put 2 back in.  Good enough for me though.

Step 9: Reassemble the power supply.

Make sure the wires leading to the new fan do not get in the way of the fan blades and make sure to tuck the one edge of the cover under the case as you reassemble it:

BTW: If you need the steps to reassemble the power supply into the CPU, you can read my tutorial here and follow the steps in reverse.

Updates:

5/31/12 Update: So far now I’ve had 4 power supply fans go bad.  3 of them I’ve simply replaced the fan. I just called Dell to see if by chance they had a recall on those power supplies but unfortunately, no luck.

8/20/12 Update: I had another one go bad today.  I ordered 5 of these
replacement fans from amazon.com.

8/22/12 Update: I replaced the fan in another power supply but in this case the power supply was bad.  It was making a high pitch sound and when I hooked up the new fan to it, it wouldn’t even spin up.  Luckily I had an extra.

9/18/13 Update: We had another fan go out, bringing the total to 7 power supply failures, 6 of which were only the fan.

Startech.com FAN7X15TX3 Cooling Fan
Masscool FD07015S1M34 – Case fan – 70 mm

Here are all my other Dell Computer Repair Postings:

Amazon Associate Disclosure: As an Amazon Associate I earn from qualifying purchases. This means if you click on an affiliate link and purchase the item, I will receive an affiliate commission. The price of the item is the same whether it is an affiliate link or not. Regardless, I only recommend products or services I believe will add value to Share Your Repair readers. By using the affiliate links, you are helping support Share Your Repair, and I genuinely appreciate your support.

Written By
More from John Mueller
How to Open up Disney Princess Boombox DB3000-P CD Player And Fix The AC Connector
My daughter’s portable stereo, a Disney Princess Boombox, had a problem in...
Read More

Leave a Reply

Your email address will not be published. Required fields are marked *