Apple Time Capsule Cooling Solution

Apple Time Capsule Cooling Solution
Apple Time Capsule Cooling Solution

My 500 GB Apple Time capsule has always ran hot.  It ran even hotter once I hacked it and installed a 2TB hard drive in it.  You can read how to upgrade your Time Capsule hard drive here.  I figured out an easy way to help your hacked time capsule run a little cooler. Read along to find this easy Apple Time Capsule Cooling solution for helping keep your Apple Time capsule from running so hot.

Apple Time Capsule Cooling Solution

Hardware

  • Any hard drive time capsule, I have an upgraded 500GB Time Capsule Model A1254, Part No. MB276LL/A, Buy a new time capsule here: Apple Time Capsule 2TB ME177LL/A

Parts Needed

Step 1: Buy the USB fan I have linked above.

There are many options out there but this one is affordable, is eligible for Amazon Prime free 2-day shipping, it really is well-built, and it works perfect for this application.

Arctic Breeze Mobile Fan in Packaging
Arctic Breeze Mobile Fan in the Package

Step 2: Unbox the fan and bend it as seen below.

Note that the open part of the end of the usb connector is toward the fan side:

Fan bent for use on the Apple Base Station
Bend the fan arm like this, note the orientation of the usb plug

Step 3: Plug in the fan.

Here’s the USB port location:

USB Port location on Apple Base Station
USB Port location

If the power is on to your base station the fan will come on immediately.

500 GB Airport Base Station Cooling Solution-Back View
Cooling Fan Plugged into USB Port

Step 4: Adjust the flow of air.

Bend the fan so it blows across the entire surface of the base station.  Now plastic isn’t a good conductor of heat at all (actually it’s an insulator) but this will keep the surface of your base station cool where it typically would be hot, which is an improvement.

Cooling fan installed front fiew
Here is the cooling fan in action

Now I must confess that this isn’t going to necessarily keep the insides of this base station cool but it will cool the case down significantly and that will make the inside somewhat cooler too.  Another thing you could do to make it even cooler is to peel off the rubber pad from the bottom and put 4 rubber bumper stickers on the bottom to allow air to flow underneath.

Did this article help you?  Do you have an alternative solution?  Questions?  Please leave a comment!

I’ve contemplated doing heavier modification of my time capsule to cool it but I haven’t had an issue in over 5 years use of this hacked time capsule so I’ve let it go.  If you have a suggestion or question, please share in the comments.

Please note: if you do not have any approved comments on this site then your comment must be personally approved by me before it will appear.  I do this to keep my site 100% free of spam comments.  I read them all and almost always review and respond to all comments within a day.  I look forward to hearing from you.

Other pertinent links:

Amazon Associate Disclosure: As an Amazon Associate I earn from qualifying purchases. This means if you click on an affiliate link and purchase the item, I will receive an affiliate commission. The price of the item is the same whether it is an affiliate link or not. Regardless, I only recommend products or services I believe will add value to Share Your Repair readers. By using the affiliate links, you are helping support Share Your Repair, and I genuinely appreciate your support.

Written By
More from John Mueller
How to Replace a Toilet Tank Fill Valve
Hardware: Standard tank gravity-flush toilet Fluidmaster Universal Toilet Fill Valve Tools Required:...
Read More

Leave a Reply

Your email address will not be published. Required fields are marked *